Drone rules

Remote ID in the United States

Last reviewed: 2026-11-15

What is Remote ID? How the technology works: the standards, what a broadcast contains, and Bluetooth vs Wi-Fi transmission.

In the United States, Remote ID is set by the Federal Aviation Administration (FAA) in 14 CFR Part 89. Drone operators have had to comply since 16 September 2023, and the FAA's enforcement grace period ended on 16 March 2024.

Which drones must broadcast it?

Unlike the EU and the UK, which follow class labels, the US rule is tied to registration:

Drone Remote ID
Flown recreationally, 250 g (0.55 lb) or more Required
Flown under Part 107 (commercial), any weight Required
Flown recreationally, under 250 g Not required

Model aircraft — radio-controlled planes, helicopters and gliders — fall under the same rule: at 250 g or more, they must broadcast too.

Three ways to comply

  1. Standard Remote ID drone — Remote ID built in by the manufacturer. Most new drones sold in the US today.
  2. Remote ID broadcast module — a small add-on for legacy drones built without Remote ID. Newly manufactured drones must have standard Remote ID built in. It broadcasts the take-off point instead of the pilot's live position, and can only be used within visual line of sight.
  3. FAA-Recognized Identification Area (FRIA) — drones without Remote ID may fly only inside these designated sites, run by community-based organisations or educational institutions. Most FRIAs are the flying fields of model aircraft clubs, many of them part of the Academy of Model Aeronautics (AMA), so model aircraft at club fields are typically exempt from broadcasting. Away from a FRIA, modellers usually fit a broadcast module.

What does the broadcast contain?

A standard Remote ID drone broadcasts:

Broadcast modules send the take-off location instead of the control station position. The broadcast goes out over Bluetooth or Wi-Fi, typically using the ASTM F3411 standard, and anyone nearby with a suitable receiver can read it. Linking a serial number to the owner's identity is restricted to the FAA and law enforcement — the public broadcast does not name the pilot.

Part 107 and the coming Part 108

Part 107 is the FAA's rule for commercial (non-recreational) drone flights: the pilot needs a Remote Pilot Certificate and keeps the drone within visual line of sight, at most 400 ft above the ground. Every drone flown under Part 107 must be registered and broadcast Remote ID, whatever its weight — so even a sub-250 g drone flown for work shows up. Flying beyond visual line of sight (BVLOS) under Part 107 needs an FAA waiver.

Part 108 is the FAA's proposed rule to make BVLOS flights — package delivery, agriculture, inspections — routine, without a waiver per operation. The FAA published the proposal on 7 August 2025; the final rule has been under White House review since 10 July 2026 and is not in force yet. As proposed, it tightens Remote ID for these flights:

For people on the ground, Part 108 means more drones flying far from their pilot — and their Remote ID broadcast is how you see them.

Pilot certificates and flights over people

The US has no class labels like the EU's C0 to C6. What the pilot needs depends on why you fly:

Flying What the pilot needs Registration
Recreationally, under 49 U.S.C. 44809 Pass the free online Recreational UAS Safety Test (TRUST) and follow the safety guidelines of a community-based organisation From 250 g (0.55 lb): register, $5 for three years
Under Part 107 — work, or anything not purely recreational Remote Pilot Certificate: at least 16 years old, knowledge test at an FAA-approved testing center, TSA security vetting; free online recurrent training every 24 calendar months Every drone, whatever its weight
A drone of 55 lb (25 kg) or more Outside Part 107: an FAA exemption under 49 U.S.C. 44807 Registered as an aircraft

Both kinds of flyer keep the drone within visual line of sight and at most 400 ft above the ground, and need an authorisation — usually through LAANC — to fly in controlled airspace near airports.

For flights over people who are not involved, Part 107 sorts drones into four categories. They are the closest the US comes to class labels:

Category The drone Flying over people
1 0.55 lb (250 g) or less, everything on board included; no exposed rotating parts that would cut skin Allowed
2 Shown to cause no injury worse than an impact of 11 ft-lb (about 15 J); no exposed rotating parts, no safety defects. The manufacturer files a declaration of compliance with the FAA and labels the drone Allowed
3 As Category 2, up to 25 ft-lb (about 34 J) Only over a closed or restricted-access site where everyone has been told, or without sustained flight over people; never over crowds
4 Has an FAA airworthiness certificate Allowed, within its operating limitations

Sustained flight over an open-air assembly — a crowd — is allowed in Categories 1, 2 and 4 only if the drone broadcasts Remote ID, built in or with a module. A Remote ID broadcast shows the serial number or session ID, not the pilot's certificate.

Blue UAS, the security drone law and the FCC

Separate from Remote ID, the US limits who may buy which drones:

None of this switches Remote ID off: DJI and other foreign-made drones already flying keep broadcasting, and DroneScout shows them like any other drone.

Building drones for government customers? Our DroneBeacon db300 standard Remote ID transponder has been on the Blue UAS Framework since 10 July 2026 (search for "db300"). As of October 2026, it is the only standard Remote ID module on the Framework. It is NDAA-compliant and connects to the flight controller over MAVLink or DroneCAN — see DroneBeacon on dronescout.co. Its circuit board is made and assembled in Germany, so it is ready for the 2027 circuit board rule too.

How to see it

DroneScout implements ASTM F3411, the standard used by US Remote ID drones and broadcast modules, over Bluetooth Legacy, Bluetooth Long Range S8, Wi-Fi Beacon and Wi-Fi NaN. It shows each broadcasting drone live on a map on Android and iPhone, including the pilot or take-off position. Which transports your phone can receive varies — see the FAQ — and DroneScout Bridge closes that gap for both platforms.

Official sources